Serving our customers with quality and safety first.
0.472in. and 0.480in. ⁓31/64"
0.593in. and 0.607in.
0.016in. and 0.020in.
alternate tooth twist
steel comp 410
66 fed std single material response
passivate
QQ-P-35 ty 2 or ty 3 fed spec single treatment response
flat internal teeth
1EA
Flat internal teeth
Steel comp 410
0.016 inches minimum and 0.020 inches maximum
0.593 inches minimum and 0.607 inches maximum
0.472 inches minimum and 0.480 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth passivate surface treated alternate tooth twist 0.016" material thickness 0.593" outside diameter 0.472" hole diameter
1. | FFW100C | Cage 81348 |
2. | AN936A716S | Cage 88044 |
3. | 9166152 | Cage 18876 |
4. | PMS35333-001-01 | Cage 18876 |
5. | 000-060-012 | Cage 81590 |
6. | 410894-44 | Cage 96214 |
7. | 881557-8 | Cage 49671 |
8. | 936A716CS | Cage 53397 |
9. | 1722-01 | Cage 78189 |
10. | 1722-01-00 | Cage 78189 |
11. | 457-6126 | Cage A486G |
12. | 373-0083-00 | Cage 13499 |
13. | 881557-8 | Cage 02734 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces