Serving our customers with quality and safety first.
0.168in. and 0.176in. ⁓3/16"
0.325in. and 0.336in.
0.020in.
steel
nickel
flat internal teeth
1HD
Flat internal teeth
Steel
0.020 inches
0.325 inches minimum and 0.336 inches maximum
0.168 inches minimum and 0.176 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth nickel surface treated 0.020" material thickness 0.325" outside diameter 0.168" hole diameter
1. | 53F3N | Cage 13413 |
2. | 1208 | Cage 78189 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces