Serving our customers with quality and safety first.
1.525in. and 1.561in. ⁓1-9/16"
2.430in.
0.375in. and 0.395in.
155000 pounds per square inch
33.0 rockwell c and 40.0 rockwell c
nickel alloy a
QQ-N-286 fed spec single material response
split HELICAL-Right hand
2 style and g class
Split helical-right hand
Nickel alloy a
0.375 inches minimum and 0.395 inches maximum
2.430 inches maximum
1.525 inches minimum and 1.561 inches maximum
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand 0.375" material thickness 2.430" outside diameter 1.525" hole diameter
1. | 76774-30X2PIECE7 | Cage 96169 |
2. | MS35338-133 | Cage 96906 |
3. | FFW84 | Cage 81348 |
4. | 76774-30X2 PIEC | Cage 96169 |
5. | MS35338-133 | Cage 80205 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces