Serving our customers with quality and safety first.
0.700in. ⁓45/64"
1.121in.
0.094in.
steel comp 1060
sae assn std single material response
zinc and dichromate
split HELICAL-Right hand
Split helical-right hand
Steel comp 1060
0.094 inches minimum
1.121 inches maximum
0.700 inches minimum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand zinc surface treated 0.094" material thickness 1.121" outside diameter 0.700" hole diameter
1. | 10A1915265 | Cage 23382 |
2. | 804000 | Cage 1LW55 |
3. | 804000 | Cage 61928 |
4. | 804000 | Cage 72582 |
5. | 804000 | Cage 56442 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces