Serving our customers with quality and safety first.
0.252in. and 0.260in. ⁓17/64"
0.487in.
0.062in.
6115014620291
steel comp 1064 or steel comp 1065 or steel comp 1069 or steel comp 1070
astm A-29 assn std all material responses
phosphate
ams 2481 assn std all treatment responses
split HELICAL-Right hand
Split helical-right hand
Steel comp 1064 or steel comp 1065 or steel comp 1069 or steel comp 1070
0.062 inches
0.487 inches
0.252 inches minimum and 0.260 inches maximum
Schedule B number: 7318210000
nmfc 093486
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on 6115014620291. split helical-right hand phosphate surface treated 0.062" material thickness 0.487" outside diameter 0.252" hole diameter
1. | 13230E6744 | Cage 97403 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces