Serving our customers with quality and safety first.
0.255in. and 0.263in. ⁓17/64"
0.489in.
0.062in. and 0.072in.
155000 pounds per square inch
33.0 rockwell c and 40.0 rockwell c
nickel alloy a
QQ-N-286 fed spec single material response
split HELICAL-Right hand
1HD
Split helical-right hand
Nickel alloy a
0.062 inches minimum and 0.072 inches maximum
0.489 inches maximum
0.255 inches minimum and 0.263 inches maximum
Schedule B number: 8710000090
nmfc 194160
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand 0.062" material thickness 0.489" outside diameter 0.255" hole diameter
1. | FF-W-84 | Cage 81348 |
2. | 004-003005-001 | Cage 26916 |
3. | MS35338-120 | Cage 80205 |
4. | 004-003005-001 | Cage 2M626 |
5. | MS35338-120 | Cage 96906 |
6. | 5310001872425 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces