Serving our customers with quality and safety first.
0.313in. and 0.317in. ⁓21/64"
0.494in. and 0.506in.
0.020in.
steel
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
flat external teeth
1EA
Flat external teeth
Steel
0.020 inches
0.494 inches minimum and 0.506 inches maximum
0.313 inches minimum and 0.317 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat external teeth cadmium surface treated 0.020" material thickness 0.494" outside diameter 0.313" hole diameter
1. | 2431077 | Cage 10001 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces