Serving our customers with quality and safety first.
0.102in. and 0.111in. ⁓1/8"
0.198in.
0.025in. and 0.030in.
navy special project
black
steel comp 302
aisi assn std single material response
oxide film
split HELICAL-Right hand
1EA
Split helical-right hand
Steel comp 302
0.025 inches minimum and 0.030 inches maximum
0.198 inches
0.102 inches minimum and 0.111 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand oxide film surface treated navy special project 0.025" material thickness 0.198" outside diameter 0.102" hole diameter
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces