Serving our customers with quality and safety first.
10.2 mm and 10.7 mm
18.1 mm
2.05 mm and 2.35 mm
medium mine protected vehicle - mmpv
44.0 rockwell c and 51.0 rockwell c
black
steel
zinc and chromate
split HELICAL-Right hand
1HD
Split helical-right hand
Steel
2.05 millimeters minimum and 2.35 millimeters maximum
18.1 millimeters maximum
10.2 millimeters minimum and 10.7 millimeters maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on medium mine protected vehicle - mmpv. split helical-right hand zinc surface treated 2.05mm material thickness 18.1mm outside diameter 10.2mm hole diameter
1. | B-10-DIN-127 | Cage D9182 |
2. | DIN127B-M10-A4C | Cage 15526 |
3. | B-10-DIN-127 | Cage D9182 |
4. | DIN127B-M10-A4C | Cage 15526 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces