Serving our customers with quality and safety first.
0.141in. and 0.150in. ⁓5/32"
0.275in. and 0.285in.
0.018in.
steel comp 302
aisi assn std single material response
passivate
flat internal teeth
1HD
Flat internal teeth
Steel comp 302
0.018 inches
0.275 inches minimum and 0.285 inches maximum
0.141 inches minimum and 0.150 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth passivate surface treated 0.018" material thickness 0.275" outside diameter 0.141" hole diameter
1. | 236-1040P3 | Cage D9182 |
2. | 236-1040P3 | Cage 49956 |
3. | 636122-000 | Cage 14100 |
4. | D28153-11 | Cage 72217 |
5. | 8488 | Cage 00781 |
6. | 1706-00-00 | Cage 78189 |
7. | 1706-05 | Cage 78189 |
8. | 10403 | Cage 82423 |
9. | 636122-000 | Cage 12436 |
10. | 170-6000-000 | Cage 13499 |
11. | 5310002093990 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces