Serving our customers with quality and safety first.
0.820in. ⁓53/64"
1.381in.
disc lock washer set
err default
c/o two washer shaped pieces, each with 14 cams; total width two washers 0.242 (6.15mm) ; inside diameter 0.820 (20.82 mm) ; outside diameter 1.381 (35.08 mm)
steel
zinc
3/4 inch lockwasher; zinc plated
Steel
1.381 inches
0.820 inches
Schedule B number: 7318210000
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
zinc surface treated c/o two washer shaped pieces, each with 14 cams; total width two washers 0.242 (6.15mm) ; inside diameter 0.820 (20.82 mm) ; outside diameter 1.381 (35.08 mm) disc lock washer set 1.381" outside diameter 0.820" hole diameter
1. | 108-01 | Cage 72731 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces