Serving our customers with quality and safety first.
5.1 mm and 5.5 mm
9.2 mm
1.3 mm
steel or copper alloy
split HELICAL-Right hand
1EA
Split helical-right hand
Steel or copper alloy
1.3 millimeters minimum
9.2 millimeters maximum
5.1 millimeters minimum and 5.5 millimeters maximum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand 1.3mm material thickness 9.2mm outside diameter 5.1mm hole diameter
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces