Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 91100190 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.781in. ⁓1-25/32"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.625in.
A measurement taken at right angles to the length of an internal keyway,in distinction from thickness.
0.375in.
1.000in.
The number of internal keyways included.
1
A measurement of the smallest dimension of the material,in distinction from length or width.
0.031in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
four 0.144in.dia through holes on 2.062in.bolt circle spaced 1.031in.apart
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 125
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm frtp national spec single material response
Answers.
1EA
Copper alloy 125
0.031 inches
2.625 inches
1.781 inches
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-813-6646 WASHER,KEYWAY
four 0.144in.dia through holes on 2.062in.bolt circle spaced 1.031in.apart 0.031" material thickness 2.625" outside diameter 1.781" hole diameter
- NIIN
- 008136646
- NIIN Date
- 04/18/72
- Schedule B
- 7415210000
- Name Code
- 06158
- FIIG
- A022B0
- QUP
- 1
- Historical Price
- $197.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 91100190 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
91100190 / Washer,keywayWhat is the formal definition of this item?
A washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more notches. excludes thrust type washers.
