Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2046313-1 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.291in. and 1.310in. ⁓1-5/16"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.000in.
The number of internal keyways included.
30
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
34.0 rockwell c
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
heat treated per MIL-H-6875
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4340
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5000 mil spec single material response
Answers.
1EA
Steel comp 4340
2.000 inches
1.291 inches minimum and 1.310 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-236-5567 WASHER,KEYWAY
heat treated per mil-h-6875 2.000" outside diameter 1.291" hole diameter
- NIIN
- 012365567
- NIIN Date
- 07/17/86
- Schedule B
- 7318220000
- Name Code
- 06158
- FIIG
- A022B0
- QUP
- 1
- Historical Price
- $106.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 2046313-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
2046313-1 / Washer,keywayWhat is the formal definition of this item?
A washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more notches. excludes thrust type washers.
