Serving our customers with quality and safety first.
0.171in. and 0.181in. ⁓3/16"
0.266in. and 0.286in.
0.032in. and 0.036in.
0.05675in.
2
0.028in. and 0.038in.
steel comp 631
MIL-S-25043 mil spec single material response
passivate
QQ-P-35 fed spec single treatment response
key
Key
Steel comp 631
0.028 inches minimum and 0.038 inches maximum
0.266 inches minimum and 0.286 inches maximum
0.171 inches minimum and 0.181 inches maximum
Schedule B number: 7318220000
nmfc 093486
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
key passivate surface treated 0.028" material thickness 0.266" outside diameter 0.171" hole diameter
1. | 560R537H02 | Cage 97942 |
2. | 76000187-005 | Cage 04939 |
3. | 82639-2 | Cage 73030 |
4. | G371929-1 | Cage 3B150 |
5. | G371929-1 | Cage 49956 |
6. | 82639-2 | Cage 07148 |
7. | G371929-1 | Cage 54X10 |
Nothing similar to this part number was found in our inventory
A washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more protuberances. the ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. the keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. excludes thrust type washer.