Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 510-14031-501 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.515in. ⁓1-33/64"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.250in.
The measurement from one flat surface of the key to the opposite flat surface.
0.156in.
0.665in. and 0.675in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.125in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
from ctr of washer to flat edge 1.010 on one side only
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp XM-12
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5659C assn std single material response
Answers.
5EA
Steel comp xm-12
0.125 inches
2.250 inches
1.515 inches
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-362-3706 WASHER,KEY
from ctr of washer to flat edge 1.010 on one side only 0.125" material thickness 2.250" outside diameter 1.515" hole diameter
- NIIN
- 013623706
- NIIN Date
- 08/05/92
- Schedule B
- 7318220000
- Name Code
- 01869
- FIIG
- A022B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 5
- Historical Price
- $49.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 510-14031-501 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
510-14031-501 / Washer,keyWhat is the formal definition of this item?
A washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more protuberances. the ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. the keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. excludes thrust type washer.
