Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SA75501304 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
14.0 mm
A measurement of the smallest dimension of an item,in distinction from length or width.
3.0 mm
A measurement of the longest straight line across a circular cross-sectional plane.
28.0 mm
The national stock number or the identification information of the end equipment for which the item is a part.
nsn 2320-01-304-2277 pls (palletized loading system) , 2320-01-318-9902 het (heavy equipment transporter)
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Answers.
Steel
14.0 millimeters
Schedule B number: 7318220000
nmfc 093486
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-354-2515 WASHER,FLAT
Used on nsn 2320-01-304-2277 pls (palletized loading system), 2320-01-318-9902 het (heavy equipment transporter). 14.0mm hole diameter
- NIIN
- 013542515
- NIIN Date
- 02/26/92
- Schedule B
- 7318220000
- Name Code
- 13393
- FIIG
- A022B0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- Historical Price
- $7.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 2GE725 | Cage 45152 |
| 2. | 7HE899 | Cage 45152 |
| 3. | V75501304 | Cage 78500 |
| 4. | 2GE725 | Cage 75Q65 |
Major End Users Countries and entities
- - Department of The Army
- - Australia
Availability for SA75501304 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
SA75501304 / Washer,flatWhat is the formal definition of this item?
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
