Serving our customers with quality and safety first.
rectangular
0.079in. and 0.099in. ⁓7/64"
round
1 round
0.016in. ⁓1/64"
0.144in. and 0.164in. ⁓11/64"
w/s:countermeasure set, an/SLQ-32; tactical data system. an/UYA-4 (v) ; missile, advanced medium range AIR-TO-Air (amraam) /AIM120A; repair facility, 0A8991; sentinel radar system; support equipment, B-1 aircraft; teammate, an/TRQ-32; test station, OQ-290 (v) msm; support equipment, B-52 aircraft; communications terminal, satellite an/GSC-39 (v) 1
feat
weapon system essential
steel corrosion resisting
passivate
80205-NAS620 professional/industrial association standard
1HD
Steel corrosion resisting
0.079 inches minimum and 0.099 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on w/s:countermeasure set, an/slq-32; tactical data system. an/uya-4 (v); missile, advanced medium range air-to-air (amraam)/aim120a; repair facility, 0a8991; sentinel radar system; support equipment, b-1 aircraft; teammate, an/trq-32; test station, oq-290(v)msm; support equipment, b-52 aircraft; communications terminal, satellite an/gsc-39(v)1. passivate surface treated weapon system essential 0.079" hole diameter
1. | M146-538 | Cage D9182 |
2. | P130004318 | Cage D9182 |
3. | 790537-8 | Cage 73030 |
4. | 98583400 | Cage 56183 |
5. | 99902475M | Cage S0123 |
6. | 153-0103-021 | Cage 94756 |
7. | A3144314 | Cage 1208V |
8. | 401-6357230-49 | Cage 53711 |
9. | 103A901801 | Cage 34228 |
10. | S8154-343C015 | Cage 70210 |
11. | 310-0740-080 | Cage D9182 |
12. | 9336C2008-2 | Cage 94117 |
13. | B68252 | Cage K0967 |
14. | 24-00162-038 | Cage K0268 |
15. | M146-536 | Cage 54418 |
16. | HD1197A00 | Cage F6371 |
17. | 35133800027 | Cage SD454 |
18. | 7903354-01 | Cage 06401 |
19. | 004-002894-050 | Cage 26916 |
20. | 236M0001P003 | Cage 3B150 |
21. | 4197600-16 | Cage 05869 |
22. | A3144314 | Cage 80063 |
23. | 418154-50 | Cage 96214 |
24. | 310-0740-080 | Cage 13499 |
25. | 10581431-43 | Cage 18876 |
26. | SM-C-596378-21 | Cage 80063 |
27. | 7903354-01 | Cage 90536 |
28. | 40530005416 | Cage S0522 |
29. | S05225953080 | Cage S0522 |
30. | 5953080 | Cage S0522 |
31. | 1.450516 | Cage 59702 |
32. | 947620-4022 | Cage 13973 |
33. | A3144314 | Cage 0079V |
34. | 10075052 | Cage A486G |
35. | 447144031103 | Cage 0000V |
36. | 236M0001P003 | Cage 49956 |
37. | 310-0470-080 | Cage 13499 |
38. | 5310000434708 | Cage SCY13 |
39. | 5310001629918 | Cage SCY13 |
40. | 153-0183-002 | Cage 94756 |
41. | NAS620C02 | Cage 80205 |
42. | NAS620C2L | Cage 80205 |
43. | 153-0183-002 | Cage 13783 |
44. | 9336C2008-2 | Cage 87557 |
45. | PW026-2 | Cage 13783 |
46. | 35133800027 | Cage 3686A |
47. | 236M0001P003 | Cage 54X10 |
48. | 90945A705 | Cage 39428 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.