Serving our customers with quality and safety first.
rectangular
0.195in. ⁓13/64"
round
1 round
0.032in. ⁓3/64"
0.354in. ⁓23/64"
steel corrosion resisting
QQ-S-766, cond a fed spec single material response
passivate
On 08/25/2009 under contract SPM5A409M2266 for qty 4,841
1HD
Steel corrosion resisting
0.195 inches
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
passivate surface treated 0.195" hole diameter
1. | SS-472-2477292- 111 | Cage D9182 |
2. | 309031 | Cage 03104 |
3. | CAV10-207P | Cage 11871 |
4. | 092-45353C010L | Cage 76301 |
5. | 2504638-13 | Cage 07187 |
6. | 186445 | Cage D9182 |
7. | B68180 | Cage K0967 |
8. | 004-002894-061 | Cage 26916 |
9. | 4197600-34 | Cage 05869 |
10. | 92083-13 | Cage 59875 |
11. | 510387 | Cage 73030 |
12. | 186445 | Cage 66503 |
13. | 995627 | Cage F0296 |
14. | 995627 | Cage F1688 |
15. | 15700586-4 | Cage FAQ15 |
16. | 947620-4131 | Cage D4856 |
17. | 418154-6 | Cage 96214 |
18. | 995627 | Cage F6103 |
19. | 995627 | Cage FA3T0 |
20. | 947620-4121 | Cage 13973 |
21. | 310-0740-520 | Cage 13499 |
22. | 15700586-4 | Cage F6151 |
23. | 5310007819483 | Cage SCY13 |
24. | NAS620-C10L | Cage FAFL7 |
25. | 10055901 | Cage A486G |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.