Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1149C0332R specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
rectangular
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.193in. and 0.213in. ⁓7/32"
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.
round
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
1 round
A measurement of the smallest dimension of an item,in distinction from length or width.
0.028in. and 0.036in. ⁓3/64"
A measurement of the longest straight line across a circular cross-sectional plane.
0.433in. and 0.458in. ⁓15/32"
The national stock number or the identification information of the end equipment for which the item is a part.
mrap RG-33
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 301 or steel comp 302 or steel comp 304 or steel comp 316
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5059 mil spec all material responses
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
The document designator of the specification or standard which established the item of supply.
80205-NAS1149 professional/industrial association standard
Answers.
On 11/23/2015 under contract SPM5EY13D05540143 for qty 1,634
1HD
Steel comp 301 or steel comp 302 or steel comp 304 or steel comp 316
0.193 inches minimum and 0.213 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-352-2752 WASHER,FLAT
Used on mrap rg-33. passivate surface treated 0.193" hole diameter
- NIIN
- 013522752
- NIIN Date
- 01/23/92
- Schedule B
- 7318220000
- Name Code
- 13393
- FIIG
- A022B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $4.48 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 4915831-13 | Cage 76301 |
| 2. | 920429 | Cage 34228 |
| 3. | NAS1149C0332J | Cage 80205 |
| 4. | 38-18416-0008-0 | Cage 86329 |
| 5. | AN960C10L | Cage 81350 |
| 6. | 10122225 | Cage A486G |
| 7. | ASNA2397C10L | Cage F6198 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Department of The Navy
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Finland
- - Lithuania
- - Slovenia
- - Poland
- - Romania
- - Bulgaria
- - Czech Republic
- - Brazil
- - Spain
- - Singapore
- - Malaysia
- - Australia
- - Belgium
- - Canada
- - New Zealand
- - France
- - Germany
- - Republic of Korea
- - United Kingdom
- - Netherlands
- - Portugal
- - Italy
- - Denmark
- - Norway
- - Greece
- - Turkey
- - Nato Maintenance And Supply Agency
Major End Items End use applications
- - Aircraft, sof ( ac-130h, mc-130h, ec-130e, hc-130)
- - Engine, aircraft, tf34-ge-100 (a-10)
- - Aircraft, c-2a (reprocured)
- - Engine, aircraft, f100-pw-100 (f-15a/b/c/d)
- - Vertical launching system, mk-41
- - Engine, aircraft, f110-ge-100/129 (f-16 c/d)
- - Tactical air opns module (an/tyq-(23)
- - Helicopter, mh-53e
- - Engine, t703-ad-700 /a /b /c (oh-58d)
- - Door,access,aircraft
- - Fan assembly,centrifugal
- - Feeder,automatic gun
- - Globe,electric light
- - Door,aircraft
- - Launcher,guided missile,aircraft
- - Frame,canopy,aircraft
- - Cylinder assembly,actuating,linear
- - Housing,liquid pump
- - Valve assembly
- - Test set subassembly,electrical and electronic test equipment
- - Exh duct shrd assy
- - Nut,self-locking,hexagon
- - Fairing,missile lau
- - Helicopter,attack
- - Helicopter,attack
- - Helicopter,attack
- - Helicopter,attack
- - Launcher,guided missile,aircraft
- - Fairing,aircraft
- - Skin,aircraft
- - Canopy control,fowa
- - Box,torque
- - Door,access
- - Power supply
- - Landing gear,retractable
- - Panel,structural,aircraft
- - Panel,control,electrical-electronic equipment
- - Door,aircraft,access
- - Door,access,aircraft
- - Valve,solenoid
- - Control,mode selector,navigation
- - Actuator,electro-mechanical,rotary
- - Distribution box
- - Resistor assembly
- - Relay assembly
- - Connector assembly,electrical
- - Valve assembly,manifold
- - Engine,gas turbine,nonaircraft
- - Support assembly,ca
- - Box,resistor
- - Inlet scoop assembl
- - Electronic components assembly
- - Recorder-reprod
- - Valve,butterfly
- - Fan,tubeaxial
- - Valve,butterfly
- - Test set,electron tube
- - Test set,electronic systems
- - Test stand,electro-optical system components
- - Adapter,test
- - Actuator,electro-mechanical,linear
- - Interconnecting box
- - Chain and cable ass
- - Deflector assembly,blast
- - Cover,access,aircraft
- - Wiring harness,branched
- - Ejector assembly,air
- - Chain and cable ass
- - Chain and cable ass
- - Valve,regulating,fluid pressure
- - Door,access,aircraft
- - Manifold assembly,hydraulic
- - Fairing,aircraft
- - Cowling
- - Power supply
- - Manifold assembly,hydraulic
- - Helicopter,attack
- - Helicopter,attack
- - Helicopter,attack
- - Helicopter,attack
- - Interconnecting box
- - Support,structural component,aircraft
- - Beam,hoisting
- - Fitting,structural component,aircraft
- - Antenna-receiver-transmitter group,acquisition
- - Valve,butterfly
- - Piston,landing gear strut
- - Support,structural component,aircraft
- - Valve,regulating,fluid pressure
- - Stand,maintenance,aircraft power unit
- - Support,structural component,aircraft
- - Engine,gas turbine,nonaircraft
- - Control,gyroscope,attitude-heading
- - Valve,linear,directional control
- - Door,access,aircraft
- - Skin,aircraft
- - Regulator,voltage
- - Former,aircraft
- - Former,aircraft
- - Valve,regulating,temperature
- - Support assembly
- - Support assembly
- - Windshield panel,aircraft
- - Test set group,waveguide devices
- - Launcher,guided missile,aircraft
- - Box assembly
- - Duct assembly,air conditioning-heating,aircraft
- - Valve,butterfly
- - Windshield panel,aircraft
- - Canopy,fixed
- - Duct assembly,air conditioning-heating,aircraft
- - Control,receiver
- - Torque tube assembl
- - Landing gear,retractable
- - Electronic components assembly
- - Pylon,aircraft
- - Plumbing assembly,e
- - Pylon,aircraft
- - Frame,window,aircraft
- - Fixture,aircraft maintenance
- - Valve,regulating,fluid pressure
- - Valve,regulating,fluid pressure
- - Adapter subassembly,electrical test set
- - Plug-in unit,electrical-electronic test equipment
- - Power supply
- - Heat exchanger,air to air,aircraft
- - Door,access,aircraft
- - Door,access,aircraft
- - Launcher,guided missile,aircraft
- - Regulator,voltage
- - Test set,guided missile system
- - Electronic components assembly
- - Receiver,radar
- - Door,access
- - Duct assembly,inlet
- - Torque tube assembl
- - Duct assembly,air conditioning-heating,aircraft
- - Chassis,electrical-electronic equipment
- - Chassis,electrical-electronic equipment
- - Box assembly,vertical stabilizer
- - Camera,television
- - Screw,cap,socket head
- - Shim
- - Frame,canopy,aircraft
- - Deflector assembly
- - Pylon,aircraft
- - Servocylinder
- - Bellcrank assembly
- - Door,access,aircraft
- - Cover,access,aircraft
Availability for NAS1149C0332R A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1149C0332R / Washer,flatWhat is the formal definition of this item?
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
