Serving our customers with quality and safety first.
rectangular
0.164in. and 0.184in. ⁓3/16"
round
1 round
0.022in. and 0.042in. ⁓3/64"
0.370in. and 0.395in. ⁓13/32"
steel
MIL-S-7952 mil spec single material response or QQ-S-698 fed spec single material response
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
1HD
Steel
0.164 inches minimum and 0.184 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated 0.164" hole diameter
1. | 911241 | Cage 2A659 |
2. | 004-003081-023 | Cage 26916 |
3. | 110288 | Cage 89536 |
4. | 791-540-90328 | Cage 99193 |
5. | 24-00018-007 | Cage 00724 |
6. | 24-00018-057 | Cage 00724 |
7. | 4197410-50 | Cage 05869 |
8. | 8526121 | Cage 18876 |
9. | TV90790-3 | Cage 59875 |
10. | TX90790-3 | Cage 59875 |
11. | 10965053 | Cage 19203 |
12. | 7220260P31 | Cage 24446 |
13. | 84040 | Cage 29201 |
14. | 4197410-50 | Cage 82577 |
15. | 1640-8 | Cage 99167 |
16. | NAS1149FN832P | Cage 88044 |
17. | 8791290 | Cage 19203 |
18. | 415780 | Cage 94580 |
19. | 495150-301 | Cage 30086 |
20. | 210-0804-00 | Cage D9182 |
21. | 938.77.11.111 | Cage S4080 |
22. | 2410025 | Cage 001JK |
23. | 208063 | Cage 66503 |
24. | 80122-05 | Cage 77294 |
25. | 91624440 | Cage F6481 |
26. | 5-220-1-08-000 | Cage F0086 |
27. | Z00.N5741503190 | Cage F0086 |
28. | N5741503190 | Cage F0210 |
29. | 2410025 | Cage FB459 |
30. | 407 563 | Cage 77294 |
31. | 51702431 | Cage 74063 |
32. | 5953632 | Cage S0522 |
33. | 801173 | Cage 09786 |
34. | STANDARD8 | Cage 73682 |
35. | 2410025 | Cage S4956 |
36. | 10196500 | Cage A486G |
37. | 911241 | Cage 06848 |
38. | 5337-0800 | Cage 0KDP7 |
39. | 801173-00 | Cage 32345 |
40. | 5310005158058 | Cage SCY13 |
41. | 7220260P31 | Cage 99971 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.