Serving our customers with quality and safety first.
We do not have any technical information for this item. Please submit your request above for more information.
On 11/17/2008 under contract SPM5AZ08D00440014 for qty 5,000
1HD
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
1. | AN 960C10 | Cage D9182 |
2. | AN935C10 | Cage D9182 |
3. | AN960C316 | Cage D9182 |
4. | MSK1957-79 | Cage D9182 |
5. | 8924401-6 | Cage 49671 |
6. | AN960C10 | Cage 88044 |
7. | FFW92 | Cage 81348 |
8. | 004-003081-032 | Cage 26916 |
9. | 925001-0006 | Cage 65597 |
10. | 763721-2 | Cage 73030 |
11. | AN960C-10 | Cage 10237 |
12. | 153-0013-010 | Cage 94756 |
13. | 945723-2102 | Cage 06481 |
14. | 401-6357200-76 | Cage 80064 |
15. | AN960C10 | Cage 80205 |
16. | NAS1149C0363 | Cage 80205 |
17. | 401-6357230-59 | Cage 53711 |
18. | 791-540-90230 | Cage 99193 |
19. | 0740634 | Cage S3002 |
20. | 938.77.61.013 | Cage S4080 |
21. | 272 509 422 | Cage D3683 |
22. | Z00.N5741504260 | Cage F0086 |
23. | 9387761013 | Cage S4080 |
24. | 99148346 | Cage F6481 |
25. | 10062854 | Cage A486G |
26. | 763721-1 | Cage 13983 |
27. | 153-0013-010 | Cage 68237 |
28. | 804216-00 | Cage 32345 |
29. | 5310001670801 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.