Serving our customers with quality and safety first.
rectangular
0.433in. and 0.453in. ⁓29/64"
round
1 round
0.064in. and 0.104in. ⁓7/64"
0.993in. and 1.030in. ⁓1-1/32"
mrap buffalo MK2A2; mrap - M-Atv DV178; mrap - M-Atv
feat
weapon system essential
steel
66 fed std single material response
cadmium and chromate
QQ-P-416, ty 2, cl 3 fed spec single treatment response
a type and 1 grade and a class
On 08/24/2010 under contract SPM5A810M2479 for qty 2,620
1HD
Steel
0.433 inches minimum and 0.453 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on mrap buffalo mk2a2; mrap - m-atv dv178; mrap - m-atv. cadmium surface treated weapon system essential 0.433" hole diameter
1. | 4B5271 | Cage D9182 |
2. | AN945-6 | Cage D9182 |
3. | MS15795-15 | Cage D9182 |
4. | 120389 | Cage 80195 |
5. | MS27183-15 | Cage 96906 |
6. | FF-W-92 | Cage 81348 |
7. | 492346 | Cage 7X677 |
8. | 38180 | Cage 96046 |
9. | 12387279-15 | Cage 19207 |
10. | 110380A | Cage 45152 |
11. | 13207E7100FN466 | Cage 97403 |
12. | 7HR818 | Cage 45152 |
13. | 5310-300 | Cage 61796 |
14. | 106263 | Cage D9182 |
15. | 309346 | Cage H0001 |
16. | 0309346 | Cage H0001 |
17. | 0717580 | Cage S3002 |
18. | 4197515-022 | Cage 05869 |
19. | 15015 | Cage K8693 |
20. | 331967 | Cage 11862 |
21. | 492346 | Cage 11862 |
22. | MS15795-115 | Cage 96906 |
23. | 10082607 | Cage A486G |
24. | CSA46410 | Cage 82254 |
25. | 5310PL0352231 | Cage 9009H |
26. | 5310008094061 | Cage SCY13 |
27. | S018003 | Cage 03677 |
28. | 110380A | Cage 75Q65 |
29. | MS27183-15 | Cage A9271 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.