Serving our customers with quality and safety first.
rectangular
0.115in. and 0.125in. ⁓1/8"
round
round
0.032in. ⁓3/64"
0.204in. and 0.224in. ⁓15/64"
mrap RG-33 and RG-33 auv
steel corrosion resisting
QQ-S-766 fed spec single material response
passivate
80205-NAS620 professional/industrial association standard
1HD
Steel corrosion resisting
0.115 inches minimum and 0.125 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on mrap rg-33 and rg-33 auv. passivate surface treated 0.115" hole diameter
1. | NAS620C4 | Cage D9182 |
2. | NAS620C4-ALTN | Cage D9182 |
3. | 763721-7 | Cage 73030 |
4. | 933-018 | Cage 76301 |
5. | 4129-0006 | Cage 19397 |
6. | 153-0103-020 | Cage 94756 |
7. | 750203 | Cage 23386 |
8. | 100-782P1 | Cage D9182 |
9. | 418154-54 | Cage 96214 |
10. | NAS620-C4 | Cage 0178B |
11. | 7903354-02 | Cage 06401 |
12. | B68227 | Cage K0967 |
13. | 24-00162-039 | Cage K0268 |
14. | 143600004 | Cage D1876 |
15. | 004-002894-054 | Cage 26916 |
16. | 146-200509-17 | Cage 73949 |
17. | 947620-4042 | Cage 06481 |
18. | 310-0740-240 | Cage 13499 |
19. | NAS620C4 | Cage 80205 |
20. | 153-0183-006 | Cage 94756 |
21. | 1200884-1 | Cage 55972 |
22. | PW026-4 | Cage 13783 |
23. | 7903354-02 | Cage 90536 |
24. | NAS620-C4 | Cage 88044 |
25. | 91921002 | Cage 88769 |
26. | 10056083 | Cage A486G |
27. | 1200884-1 | Cage 19315 |
28. | 5310000570573 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.