Serving our customers with quality and safety first.
rectangular
0.380in. and 0.400in. ⁓13/32"
round
1 round
0.053in. and 0.073in. ⁓5/64"
0.620in. and 0.645in. ⁓21/32"
steel corrosion resisting or steel comp 321 or steel comp 347 or steel comp 348
MIL-S-5059 mil spec 1st material response and MIL-S-6721 mil spec 2nd material response and MIL-S-6721 mil spec 3rd material response and MIL-S-6721 mil spec 4th material response
passivate
a type and 2 grade and b class
On 07/25/2013 under contract SPM5E413M5523 for qty 2,441
1HD
Steel corrosion resisting or steel comp 321 or steel comp 347 or steel comp 348
0.380 inches minimum and 0.400 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
passivate surface treated 0.380" hole diameter
1. | A34821-1-13 | Cage D9182 |
2. | AN960C6616 | Cage D9182 |
3. | AN960-C616 | Cage D9182 |
4. | AN960-CA166 | Cage 88044 |
5. | FF-W-92 | Cage 81348 |
6. | 8107247 | Cage 19203 |
7. | 890460 | Cage 19203 |
8. | 34A1766-3 | Cage 80049 |
9. | 236M0010P009 | Cage 3B150 |
10. | 945723-2162 | Cage 06481 |
11. | 004-003081-038 | Cage 26916 |
12. | 310-0540-000 | Cage 13499 |
13. | AN960C616 | Cage 4Y0S1 |
14. | 801-6641190FNA40 | Cage 53711 |
15. | 153-0013-016 | Cage 94756 |
16. | 3337810-19 | Cage 59364 |
17. | L31762P01 | Cage 07482 |
18. | 166216PC6 | Cage 53711 |
19. | 006-0007-33 | Cage D9182 |
20. | 938.77.61.019 | Cage S4080 |
21. | NAS1149C0663R | Cage 10630 |
22. | 407 678 | Cage 77294 |
23. | NAS1149C0663R | Cage 80205 |
24. | GW10C-616 | Cage 26512 |
25. | LM303-174 | Cage 76005 |
26. | 416631-9 | Cage 96214 |
27. | 8107247 | Cage 18876 |
28. | AN960C616 | Cage 81350 |
29. | AN960C616 | Cage 88044 |
30. | 10082405 | Cage A486G |
31. | 236M0010P009 | Cage 49956 |
32. | D800660 | Cage 0D4J7 |
33. | A-807828C ITEM 3 | Cage 31922 |
34. | D800660 | Cage 31922 |
35. | 5310001670804 | Cage SCY13 |
36. | NAS1149C06663R | Cage 80205 |
37. | ASNA2397C616 | Cage F6198 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.