Serving our customers with quality and safety first.
rectangular
0.214in. and 0.227in. ⁓15/64"
round
1 round
0.036in. and 0.065in. ⁓5/64"
0.433in. and 0.453in. ⁓29/64"
steel comp 301 or steel comp 302 or steel comp 316
66 fed std all material responses
passivate
QQ-P-35 fed spec single treatment response
a type and 1 grade and b class
On 07/31/2015 under contract SPM7LX12D90068640 for qty 930
1HD
Steel comp 301 or steel comp 302 or steel comp 316
0.214 inches minimum and 0.227 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
passivate surface treated 0.214" hole diameter
1. | 946008-8080 | Cage D9182 |
2. | 842555 | Cage D9182 |
3. | MS15795-807 | Cage D9182 |
4. | MS16996-9 | Cage D9182 |
5. | P130005208 | Cage D9182 |
6. | FF-E-92 | Cage 81348 |
7. | 52813AX | Cage 45152 |
8. | 1737102-136 | Cage D9182 |
9. | 344-02024 | Cage D9182 |
10. | 2468833-6 | Cage D9182 |
11. | 2556G-16 | Cage D9182 |
12. | MS15795-808 | Cage 0178B |
13. | A05205 | Cage K0967 |
14. | 0716638 | Cage S3002 |
15. | MS15795-808 | Cage 80205 |
16. | 411027-808 | Cage 96214 |
17. | 310-0779-080 | Cage 13499 |
18. | 4912548-03 | Cage 03956 |
19. | 738-990002-172 | Cage 38753 |
20. | 4912548-03 | Cage 90536 |
21. | 12Z3035-430 | Cage 94135 |
22. | MS15795-808 | Cage 96906 |
23. | 200609H014 | Cage 28528 |
24. | 74468072008 | Cage 89944 |
25. | 8175541 | Cage 19207 |
26. | 571741H3 | Cage 73030 |
27. | 18100-63 | Cage 74025 |
28. | 9157794-10 | Cage 18876 |
29. | 8924401-6 | Cage 02769 |
30. | 33923 | Cage 17657 |
31. | AN960-10C | Cage 78553 |
32. | 4197500-015 | Cage 05869 |
33. | 946008-1408 | Cage 06481 |
34. | 8175541 | Cage 0FW39 |
35. | 8924401-6 | Cage 11447 |
36. | 503010 | Cage 50429 |
37. | 004-002853-808 | Cage 26916 |
38. | 5310005956772 | Cage SCY13 |
39. | 5310006191148 | Cage SCY13 |
40. | ASC1538433 | Cage Z4779 |
41. | 0770-9 | Cage 06424 |
42. | 98019A130 | Cage 39428 |
43. | 457-6204 | Cage A486G |
44. | 52813AX | Cage 75Q65 |
45. | MS15795-808 | Cage 98255 |
46. | MS15975-808 | Cage 80205 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.