Serving our customers with quality and safety first.
We do not have any technical information for this item. Please submit your request above for more information.
1PG
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
1. | AN960C414 | Cage D9182 |
2. | MS15795-842 | Cage D9182 |
3. | P130005204 | Cage D9182 |
4. | Y7&4 | Cage 00141 |
5. | 5160004-00 | Cage 34257 |
6. | FFW92 | Cage 81348 |
7. | TYPEAGRADE1CLASSB | Cage 81348 |
8. | 102A901702 | Cage 34228 |
9. | 2710806PC80 | Cage 92003 |
10. | 310-0045-000 | Cage D9182 |
11. | 36038-3408 | Cage D9182 |
12. | 236-1149P5 | Cage D9182 |
13. | 0188-5 | Cage 07187 |
14. | 310-0045-000 | Cage 79807 |
15. | B70342 | Cage K0967 |
16. | AN96004 | Cage K0058 |
17. | 24 00051 004 | Cage K0268 |
18. | 4912548-10 | Cage 03956 |
19. | MWA-011 | Cage K0978 |
20. | MS15795-804 | Cage 03640 |
21. | 74468072004 | Cage 89944 |
22. | 504A2-4-52 | Cage 94033 |
23. | 411027-804 | Cage 96214 |
24. | 925000-0804 | Cage 65597 |
25. | MS15795-804 | Cage 80205 |
26. | 3055125-0223 | Cage 55972 |
27. | 416631-1 | Cage 96214 |
28. | 3055125-0223 | Cage 96774 |
29. | 4912548-10 | Cage 90536 |
30. | 4197500-010 | Cage 82577 |
31. | 1088-5 | Cage 56232 |
32. | 15700588 | Cage FAQ15 |
33. | 15700588-5 | Cage FAQ15 |
34. | 143600804 | Cage D1876 |
35. | 503014 | Cage 50429 |
36. | 24856-0804 | Cage 19397 |
37. | 946008-8040 | Cage 06481 |
38. | S8154-120C020 | Cage 70210 |
39. | 401-6357230-51 | Cage 53711 |
40. | 236-1149P5 | Cage 3B150 |
41. | 40530002716 | Cage S0522 |
42. | CB3500-76 | Cage 12781 |
43. | MS15795-304 | Cage 96906 |
44. | MS15795-804 | Cage 96906 |
45. | 946008-8040 | Cage 13973 |
46. | 10121698 | Cage A486G |
47. | 310-0045-000 | Cage 95104 |
48. | 90400-5 | Cage 04643 |
49. | 1088-5 | Cage 06424 |
50. | 221430 | Cage 24617 |
51. | 24-00029-004 | Cage 00724 |
52. | 118512 | Cage 06481 |
53. | 4197500-010 | Cage 05869 |
54. | 907341K35 | Cage 06848 |
55. | 310-0045-00 | Cage 13499 |
56. | THWA0409 | Cage 04643 |
57. | 15700588 | Cage F6151 |
58. | 15700588-5 | Cage F6151 |
59. | 188-5 | Cage 56232 |
60. | 5310007821349 | Cage SCY13 |
61. | 236-1149P5 | Cage 49956 |
62. | 236-1149P5 | Cage 54X10 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.