Serving our customers with quality and safety first.
We do not have any technical information for this item. Please submit your request above for more information.
1HD
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
1. | 51A138B325 | Cage D9182 |
2. | 860135-5 | Cage D9182 |
3. | H95516-0600 | Cage D9182 |
4. | MS1579-805 | Cage D9182 |
5. | MS15795-305 | Cage D9182 |
6. | MS15795-80 | Cage D9182 |
7. | MS15957-805 | Cage D9182 |
8. | N400P7 | Cage D9182 |
9. | M15795-805 | Cage D9182 |
10. | WFW-SS-0161-B-0 307-C-039-1 | Cage D9182 |
11. | P130005205 | Cage D9182 |
12. | FFW92 | Cage 81348 |
13. | TYPEAGRADE1CLASSB | Cage 81348 |
14. | 74468072005 | Cage 89944 |
15. | D304366 FIND NO 8 | Cage 3X894 |
16. | WG108973 | Cage 3X894 |
17. | 6314781 FIND NO 12 | Cage 53711 |
18. | MS15795-305 | Cage 19204 |
19. | 75024 | Cage 23386 |
20. | 153-0227-007 | Cage D9182 |
21. | 05032-0009 | Cage D9182 |
22. | 0770-7 | Cage D9182 |
23. | 1006 | Cage D9182 |
24. | 103A901801 | Cage D9182 |
25. | 19208 | Cage D9182 |
26. | 22N6320-001 | Cage D9182 |
27. | 236-1113P3 | Cage D9182 |
28. | A05203 | Cage K0967 |
29. | 503/4/04091/044 | Cage K2523 |
30. | 24-00051-005 | Cage K0268 |
31. | VA-97-7078-805 | Cage K0668 |
32. | 06153-00-005 | Cage 14304 |
33. | 738-990001-340 | Cage 38753 |
34. | 411027-805 | Cage 96214 |
35. | 70D4000704-80 | Cage 04655 |
36. | 0770-7 | Cage 07187 |
37. | 9300-333 | Cage 06141 |
38. | 56918 | Cage 93835 |
39. | 925000-0805 | Cage 65597 |
40. | 946008-1405 | Cage 06481 |
41. | 9072390 | Cage 18876 |
42. | 236-1070P3 | Cage 49956 |
43. | 6LBB | Cage 71313 |
44. | MS15795-805 | Cage 80205 |
45. | MS15795-305 | Cage A2309 |
46. | SM-B-696631-6 | Cage 80063 |
47. | G302439-7 | Cage 04963 |
48. | G302439-7 | Cage 56540 |
49. | 4912548-01 | Cage 90536 |
50. | 4197500-122 | Cage 05869 |
51. | 010682 | Cage D0078 |
52. | 143600805 | Cage D1876 |
53. | 910C331-44 | Cage 99167 |
54. | 4912548-01 | Cage 03956 |
55. | 0218-0805 | Cage 33783 |
56. | 56918 | Cage D0079 |
57. | 3-7DIN433NRST | Cage D8385 |
58. | 946008-8050 | Cage 06481 |
59. | 401-6357235-36 | Cage 53711 |
60. | 010048-805 | Cage 81413 |
61. | 236-1149P35 | Cage 3B150 |
62. | 5953530 | Cage S0522 |
63. | 40530002816 | Cage S0522 |
64. | 5032-9 | Cage 26344 |
65. | 910C331-44 | Cage 83843 |
66. | MS15795-805 | Cage 96906 |
67. | 946008-8050 | Cage 13973 |
68. | 200609H010 | Cage 28528 |
69. | 10121613 | Cage A486G |
70. | 3555-120-1019 | Cage 58880 |
71. | 18100-57 | Cage 74025 |
72. | MS15795-805 | Cage 15901 |
73. | 5310007225998 | Cage SCY13 |
74. | ASC1538391 | Cage Z4779 |
75. | 236-1149P35 | Cage 49956 |
76. | 43W7745-308 | Cage 10001 |
77. | 12Z3006-5 | Cage 10001 |
78. | 957-156-0003 | Cage 13913 |
79. | MS15795-805 | Cage 98255 |
80. | 236-1149P35 | Cage 54X10 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.