Serving our customers with quality and safety first.
rectangular
0.401in. and 0.421in. ⁓27/64"
round
1 round
0.051in. and 0.080in. ⁓3/32"
0.805in. and 0.827in. ⁓53/64"
MRAP-RG-33 armored utility vehicle (auv) ; mrap buffalo MK2A2
steel comp 1008 or steel comp 1009 or steel comp 1010 or steel comp 1011 or steel comp 1012 or steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020
astm A109 assn std all material responses
cadmium and chromate
QQ-P-416, ty 2, cl 3 fed spec single treatment response
On 09/02/2010 under contract SPM5AZ08D00470712 for qty 15,000
1HD
Steel comp 1008 or steel comp 1009 or steel comp 1010 or steel comp 1011 or steel comp 1012 or steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020
0.401 inches minimum and 0.421 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on mrap-rg-33 armored utility vehicle (auv); mrap buffalo mk2a2. cadmium surface treated 0.401" hole diameter
1. | MS-27183-14 | Cage D9182 |
2. | X14141 | Cage D9182 |
3. | S602 | Cage D9182 |
4. | MS27183-14 | Cage 03950 |
5. | W221NAAN037SN038NNCG1 | Cage 80204 |
6. | W206P | Cage 93236 |
7. | MS27183-14 | Cage 96906 |
8. | FF-W-92 | Cage 81348 |
9. | 9438083 | Cage 7X677 |
10. | B4525-307-41 | Cage 60532 |
11. | 362AX1 | Cage 45152 |
12. | 4398 | Cage 23834 |
13. | SK-6005-3 | Cage 0EAK3 |
14. | 7G32102 | Cage 23382 |
15. | 02833 | Cage 77640 |
16. | 5118-140-38 | Cage 79466 |
17. | 9419234 | Cage 7X677 |
18. | 5118-140-38 | Cage 80372 |
19. | W03-001859 | Cage 88219 |
20. | 32102 | Cage 94431 |
21. | 5593213 | Cage 34623 |
22. | 526-1516 | Cage 44940 |
23. | MS27183-14 | Cage 03670 |
24. | MS27183-14 | Cage 6R888 |
25. | 408452N ITEM 2 | Cage 03670 |
26. | D21059-16 | Cage 0BXF1 |
27. | 453 | Cage 30874 |
28. | 122-5377661 ITEM 37 | Cage 53711 |
29. | 103341 | Cage 92679 |
30. | 122-53T1661 ITEM 37 | Cage 53711 |
31. | 812A5C4 | Cage D2167 |
32. | 12A5C4 | Cage 33968 |
33. | 1176J92-19 | Cage D9182 |
34. | 120394 | Cage D9182 |
35. | 12A5C4 | Cage D9182 |
36. | 15001-9 | Cage D9182 |
37. | 103341 | Cage D9182 |
38. | 3631V007 | Cage D9182 |
39. | 62.81.017 | Cage 0124B |
40. | MS27183-14 | Cage 0158B |
41. | 0707807 | Cage S3002 |
42. | 410060135 | Cage S5652 |
43. | 664423 | Cage 89749 |
44. | K376 | Cage 00198 |
45. | 020035 | Cage 99832 |
46. | 9438083 | Cage 11862 |
47. | 9419234 | Cage 11862 |
48. | 9438084 | Cage 11862 |
49. | 70026-14 | Cage 95097 |
50. | MS15795-214 | Cage 96906 |
51. | D21059-16 | Cage 07860 |
52. | 10082380 | Cage A486G |
53. | 1229F1514 | Cage 78500 |
54. | SK-6005-3 | Cage 92916 |
55. | 11500256 | Cage 7X677 |
56. | 120394 | Cage 7X677 |
57. | 5305-080-6004 | Cage SCY13 |
58. | 5310-080-6004 | Cage SCY13 |
59. | 5310000806004 | Cage SCY13 |
60. | 5310005626553 | Cage SCY13 |
61. | LS1091391 | Cage 01417 |
62. | LS1091391-14 | Cage 01417 |
63. | 362AX1 | Cage 75Q65 |
64. | MS27183-14 | Cage A9271 |
65. | 5310PL0567398 | Cage 9009H |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.