Serving our customers with quality and safety first.
rectangular
0.214in. and 0.227in. ⁓15/64"
round
round
0.036in. and 0.065in. ⁓5/64"
0.433in. and 0.453in. ⁓29/64"
mrap - RG-33; mrap - cougar; mrap buffalo MK2A2
steel
66 fed std single material response
cadmium and chromate
QQ-P-416, ty 2, cl 3 fed spec single treatment response
a type and 1 grade and a class
1MX
Steel
0.214 inches minimum and 0.227 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on mrap - rg-33; mrap - cougar; mrap buffalo mk2a2. cadmium surface treated 0.214" hole diameter
1. | MS 27183-8 | Cage D9182 |
2. | MS15975-208 | Cage D9182 |
3. | MS27183-08 | Cage D9182 |
4. | MS27183-8 | Cage 96906 |
5. | B4525-307-23 | Cage 60532 |
6. | TIP00021 | Cage 97403 |
7. | 53006 | Cage 96046 |
8. | 4197500-032 | Cage 05869 |
9. | 4197500-032 | Cage 82577 |
10. | 446160 | Cage 21450 |
11. | 12Z3035-36 | Cage 94135 |
12. | 1018985-008 | Cage 0HBH2 |
13. | D301080 FIND NO 39 | Cage 3X894 |
14. | D301087 FIND NO 43 | Cage 3X894 |
15. | D301079 FIND NO 43 | Cage 3X894 |
16. | A10643 | Cage U4574 |
17. | A20489 | Cage U4574 |
18. | 4197515-007 | Cage 05869 |
19. | 88-368-30-130 | Cage 79092 |
20. | 35361 | Cage 05463 |
21. | STR0NGH0LDWASHER-8 | Cage 74323 |
22. | XX002-0529 | Cage H2229 |
23. | MS15795-8 | Cage 96906 |
24. | MS15795-108 | Cage 96906 |
25. | MS15795-208 | Cage 96906 |
26. | 10121721 | Cage A486G |
27. | 1018985-008 | Cage 05037 |
28. | 5310PL0721194 | Cage 9009H |
29. | 5310008098546 | Cage SCY13 |
30. | MS15795-108 | Cage 80205 |
31. | MS15795-208 | Cage 80205 |
32. | MS15795-8 | Cage 80205 |
33. | X25-49 | Cage 55469 |
34. | LS1091391 | Cage 01417 |
35. | LS10911391-8 | Cage 01417 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.