4615-9

46159 Flat Washer

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 4615-9 specification

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

zzzy

Reference Number Differentiating Characteristics
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.

material controlled iaw SS800-AG-MAN-010/P9290 system certification procedures and criteria manual for deep submergence systems and requires cleaning, packing, and marking iaw MIL-STD-1622 or MIL-STD-1330 as deemed applicable; critical item for safety and survival of deep submergence research and rescue vehicals as differentiated by special test features

Answers.

What is the NSN for 4615-9?

5310-01-633-6990

What's the federal classification of 4615-9?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

NSN 5310-01-633-6990 WASHER,FLAT

NIIN
016336990
NIIN Date
12/01/14
Schedule B
 
Name Code
13393
FIIG
A022B0
DEMIL / ITAR
Uncontrolled item (Code )
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
--
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 26-29XX-XXXXA020-021 Cage 13669
2. 7550478-26-29XX-XXXXA020-021 Cage 53711
3. G547-0002-26-29XX-XXXXA020-021 Cage 96169
4. 26-29XX-XXXXA020-021D0 Cage 03950
5. 4615-9D0 Cage 03950
6. 7550478-26-29XX-XXXXA020-021D0 Cage 03950
7. G547-0002-26-29XX-XXXXA020-021D0 Cage 03950

Major End Users Countries and entities

  • - Department of The Navy 

Availability for 4615-9 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
194160 WASHER OR GASKETS, IRON OR STEEL, 
UFC (universal freight code)
55210 

Similar by Design Other washers with similar characteristics

Nothing similar to this part number was found in our inventory

4615-9 / Washer,flatWhat is the formal definition of this item?

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.