Serving our customers with quality and safety first.
rectangular
0.255in. and 0.275in. ⁓9/32"
round
1 round
0.022in. and 0.042in. ⁓3/64"
0.495in. and 0.520in. ⁓17/32"
steel
MIL-S-7952 mil spec single material response or QQ-S-698 fed spec single material response
cadmium and chromate
QQ-P-416, ty 2, cl 3 fed spec single treatment response
a type and 1 grade and a class
On 09/08/2015 under contract SPE5EC15M0830 for qty 63,667
Steel
0.255 inches minimum and 0.275 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated 0.255" hole diameter
1. | AN960-4166 | Cage D9182 |
2. | AN960416L | Cage D9182 |
3. | C20089-0250-2002 | Cage 04274 |
4. | FF-W-92 | Cage 81349 |
5. | NAS1149F0432P | Cage 88044 |
6. | MILW1085 | Cage 81349 |
7. | 10510351 | Cage 56161 |
8. | 1-4LIGHT | Cage 82402 |
9. | PL44138R10LINE144 | Cage 82402 |
10. | 7601691 | Cage 19200 |
11. | 851083 | Cage 19203 |
12. | AN960-416L | Cage 55635 |
13. | 56-192-415 | Cage 08742 |
14. | 3371597 | Cage 55380 |
15. | 911244K1 | Cage 06848 |
16. | 5-4-1602-23-3 | Cage 81337 |
17. | 186234 | Cage 66503 |
18. | 1MS95 | Cage 45152 |
19. | 22783 | Cage 53964 |
20. | P1578 | Cage 80212 |
21. | K354080 | Cage 80252 |
22. | 1640-416L | Cage 99167 |
23. | 200151 | Cage 02978 |
24. | 200152 | Cage 02978 |
25. | 27D1 | Cage 0AHP5 |
26. | 9B6884 | Cage 11083 |
27. | 346 | Cage 11599 |
28. | 5165104 | Cage 19207 |
29. | 7058733 | Cage 19207 |
30. | 7402359 | Cage 19207 |
31. | P1578 | Cage 22888 |
32. | 124A9372AA104 | Cage 24446 |
33. | 8X361 | Cage 33323 |
34. | 7058733 | Cage 0FW39 |
35. | 7402359 | Cage 0FW39 |
36. | 5165104 | Cage 0FW39 |
37. | AN960-416L | Cage 10630 |
38. | 90790-35 | Cage 59875 |
39. | 03040-90 | Cage 31361 |
40. | FFW92 | Cage 81348 |
41. | AN960-416L | Cage 06UR1 |
42. | 124-3003-284 | Cage 13499 |
43. | 502220 | Cage 21450 |
44. | 315WI | Cage 88044 |
45. | 20089-0250-2002 | Cage 60678 |
46. | 360555S7 | Cage 57526 |
47. | 360555S7S8 | Cage 57526 |
48. | 360555S8 | Cage 57526 |
49. | 3188553B PIECE | Cage 59364 |
50. | 3188572PC18 | Cage 59364 |
51. | 791-540-90331 | Cage 99193 |
52. | Y77730885 | Cage K0131 |
53. | 938.77.11.114 | Cage S4080 |
54. | RAR2454 | Cage F3015 |
55. | N5745505325 | Cage F0210 |
56. | 3233-212 | Cage F1688 |
57. | CIPRD-AN960-416L | Cage 14153 |
58. | 800103-00 | Cage 32345 |
59. | 911244 | Cage 06848 |
60. | AN9600416L | Cage 55635 |
61. | 3371597 | Cage 72915 |
62. | 721009661300 | Cage A1140 |
63. | 2410142 | Cage 001JK |
64. | 200151 | Cage R1120 |
65. | 200152 | Cage R1120 |
66. | 5-4-1602-23-3 | Cage 05699 |
67. | 8X361 | Cage 56442 |
68. | 78-420 | Cage 96152 |
69. | 8X361 | Cage 63734 |
70. | JHP68-138 | Cage 02032 |
71. | 8X361 | Cage 58275 |
72. | AN960-416L | Cage 88044 |
73. | 3233-212 | Cage F6103 |
74. | 2410142 | Cage S4956 |
75. | 360555S7 | Cage 23040 |
76. | 360555S7S8 | Cage 23040 |
77. | 360555S8 | Cage 23040 |
78. | 10116616 | Cage A486G |
79. | 202678 | Cage 06853 |
80. | 5312-1600 | Cage 0KDP7 |
81. | 0S026493 | Cage 10001 |
82. | 5A1038 | Cage 11083 |
83. | 957937 | Cage 12204 |
84. | 851083-00 | Cage 32345 |
85. | 5310001670835 | Cage SCY13 |
86. | 1MS95 | Cage 75Q65 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.