Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1355-39-2 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
rectangular
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.116in. and 0.119in. ⁓1/8"
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.
round
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
1 round
A measurement of the smallest dimension of an item,in distinction from length or width.
0.018in. and 0.020in. ⁓1/32"
A measurement of the longest straight line across a circular cross-sectional plane.
0.179in. ⁓3/16"
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 1100
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-411 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize
Answers.
Aluminum alloy 1100
0.116 inches minimum and 0.119 inches maximum
Schedule B number: 7616108000
nmfc 194120
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-183-8030 WASHER,FLAT
anodize surface treated 0.116" hole diameter
- NIIN
- 001838030
- NIIN Date
- 01/01/63
- Schedule B
- 7616108000
- Name Code
- 13393
- FIIG
- A022B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Portugal
Availability for 1355-39-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
1355-39-2 / Washer,flatWhat is the formal definition of this item?
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
