Serving our customers with quality and safety first.
rectangular
0.521in. and 0.541in. ⁓35/64"
round
1 round
0.202in. and 0.216in. ⁓7/32"
1.990in. and 2.010in. ⁓2-1/64"
mrap - unique nsn - used on 2 mrap variants
33.0 rockwell c and 38.0 rockwell c
steel comp 4130 or steel comp 4140 or steel comp 8640 or steel comp 8740
A829 assn std 1st material response or A322 assn std 1st material response or A331 assn std 1st material response or ams 6350 assn std 1st material response or ams 6351 assn std 1st material response or ams 6345 assn std 1st material response or A829 assn std 2nd material response or A322 assn std 2nd material response or A331 assn std 2nd material response or A829 assn std 3rd material response or A322 assn std 3rd material response or A331 assn std 3rd material response or A322 assn std 4th material response or A331 assn std 4th material response
zinc
MIL-STD-171, 1.9.2.2 mil std single treatment response and astm B633, ty ii, cl 2 assn std single treatment response
1EA
Steel comp 4130 or steel comp 4140 or steel comp 8640 or steel comp 8740
0.521 inches minimum and 0.541 inches maximum
Schedule B number: 8710000090
nmfc 044120
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on mrap - unique nsn - 2 mrap variants. zinc surface treated 0.521" hole diameter
1. | 10910174 | Cage 19207 |
2. | 12387327 | Cage 19207 |
Nothing similar to this part number was found in our inventory
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.