Serving our customers with quality and safety first.
0.112in. ⁓1/8"
0.365in. and 0.385in.
0.076in. and 0.096in.
0.008in. and 0.016in.
recess dia 0.237 in. min 0.247 in. max, recess angle 80 deg min 82 deg max
steel comp 1008 or steel comp 1009 or steel comp 1015 or steel comp 1018 or steel comp 1020 or steel comp 1025
astm A568 assn std 1st material response or astm A568 assn std 2nd material response or astm A568 assn std 3rd material response or astm A568 assn std 4th material response or astm A568 assn std 5th material response or MIL-S-7952 mil spec 5th material response or MIL-S-7952 mil spec 6th material response
chromium or nickel
QQ-C-320, ty 1 fed spec 1st treatment response or QQ-N-290 fed spec 2nd treatment response
finishing
80205-NAS391 professional/industrial association standard
1EA
Finishing
Steel comp 1008 or steel comp 1009 or steel comp 1015 or steel comp 1018 or steel comp 1020 or steel comp 1025
0.008 inches minimum and 0.016 inches maximum
0.365 inches minimum and 0.385 inches maximum
0.112 inches
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
finishing chromium or nickel surface treated recess dia 0.237 in. min 0.247 in. max, recess angle 80 deg min 82 deg max 0.008" material thickness 0.365" outside diameter 0.112" hole diameter
Nothing similar to this part number was found in our inventory
A washer or cone or disk shape with a centrally located hole, designed to accommodate a flat or oval head screw and provide additional bearing area on the material being fastened. it may or may not have a flush flange feature.