Serving our customers with quality and safety first.
0.206in. and 0.226in. ⁓15/64"
0.677in. and 0.697in.
0.136in. and 0.156in.
0.015in. and 0.021in.
104.0 brinell standard
hot rolled or cold drawn 1/4 hard condition or cold drawn 1/2 hard condition
copper alloy 116 or copper alloy
chromium or nickel
QQ-C-320, cl 1, ty 1 fed spec 1st treatment response or QQ-N-290, cl 1 fed spec 2nd treatment response
finishing
1EA
Finishing
Copper alloy 116 or copper alloy
0.015 inches minimum and 0.021 inches maximum
0.677 inches minimum and 0.697 inches maximum
0.206 inches minimum and 0.226 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
finishing chromium or nickel surface treated 0.015" material thickness 0.677" outside diameter 0.206" hole diameter
Nothing similar to this part number was found in our inventory
A washer or cone or disk shape with a centrally located hole, designed to accommodate a flat or oval head screw and provide additional bearing area on the material being fastened. it may or may not have a flush flange feature.