Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 25151-13-1 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.168in. and 0.178in. ⁓3/16"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.423in. and 0.453in.
The distance measured in a straight line from the bottom to the top of an item.
0.5353in. and 0.5537in.
The length of a straight line which passes through the center of the recess,and terminates at the circumference.
0.253in. and 0.263in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.0183in. and 0.0217in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
zinc
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
finishing
Answers.
Finishing
Copper alloy
0.0183 inches minimum and 0.0217 inches maximum
0.423 inches minimum and 0.453 inches maximum
0.168 inches minimum and 0.178 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-514-7721 WASHER,FINISHING
finishing zinc surface treated 0.0183" material thickness 0.423" outside diameter 0.168" hole diameter
- NIIN
- 005147721
- NIIN Date
- 01/01/63
- Schedule B
- 7415210000
- Name Code
- 15932
- FIIG
- A022B0
- QUP
- Historical Price
- $0.90 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Austria
- - France
- - Greece
Availability for 25151-13-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
25151-13-1 / Washer,finishingWhat is the formal definition of this item?
A washer or cone or disk shape with a centrally located hole, designed to accommodate a flat or oval head screw and provide additional bearing area on the material being fastened. it may or may not have a flush flange feature.
