Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M45595/7-05 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.580in. and 0.590in. ⁓19/32"
The distance from the centerline to the axis of the item.
0.515in. and 0.535in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.854in. and 0.864in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.157in. and 0.177in.
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches counterbore face
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
radius offset 0.497 min. and 0.507 max.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 or steel comp 4130
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
Answers.
Steel comp 8740 or steel comp 4130
0.157 inches minimum and 0.177 inches maximum
0.854 inches minimum and 0.864 inches maximum
0.580 inches minimum and 0.590 inches maximum
Schedule B number: 7318220000
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-452-3565 WASHER,CONCAVE
cadmium surface treated radius offset 0.497 min. 0.157" material thickness 0.854" outside diameter 0.580" hole diameter
- NIIN
- 014523565
- NIIN Date
- 01/24/98
- Schedule B
- 7318220000
- Name Code
- 15930
- FIIG
- A022B0
- QUP
- Historical Price
- $9.03 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-W-45595/7 | Cage 81349 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for M45595/7-05 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
M45595/7-05 / Washer,concaveWhat is the formal definition of this item?
A washer which is round with a centrally located hole. one bearing surface is smooth, flat, and unbroken, the other bearing surface is smooth, unbroken, and is recessed to form a curved or spherical contour. see also washer (1), convex. excludes washer (1), recessed and bearing, washer, thrust.
