Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. LS35298S03CC specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.305in. ⁓5/16"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.450in.
The length of a straight line which passes through the center of the recess,and terminates at the circumference.
0.230in.
A measurement between specified points on the recess,in distinction from height.
0.055in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.110in.
The national stock number or the identification information of the end equipment for which the item is a part.
various C5
0.030 radians
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
15 recessed
Answers.
15 recessed
Steel
0.110 inches
0.450 inches
0.305 inches
Schedule B number: 7616108000
nmfc 194160
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-613-1151 WASHER,CONCAVE
Used on various c5. 15 recessed 0.110" material thickness 0.450" outside diameter 0.305" hole diameter
- NIIN
- 016131151
- NIIN Date
- 10/30/12
- Schedule B
- 7616108000
- Name Code
- 15930
- FIIG
- A022B0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- Historical Price
- $5.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for LS35298S03CC A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
LS35298S03CC / Washer,concaveWhat is the formal definition of this item?
A washer which is round with a centrally located hole. one bearing surface is smooth, flat, and unbroken, the other bearing surface is smooth, unbroken, and is recessed to form a curved or spherical contour. see also washer (1), convex. excludes washer (1), recessed and bearing, washer, thrust.
