Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 94808A156 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
floating
0.500in.
An overall measurement of the smallest dimension of a panel,in distinction from length or width.
0.064in. and 0.125in.
The national stock number or the identification information of the end equipment for which the item is a part.
mobile int coll sys nsn 4110-01-534-7675
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
The style designation that most nearly corresponds to the appearance of the hole configuration.
configuration c
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
U-Sty; e CLIP-On nuts
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Answers.
Steel
20
Right-hand
Schedule B number: 7318160000
nmfc 093490
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-582-7010 NUT,CLIP-ON
Used on mobile int coll sys nsn 4110-01-534-7675. u-sty; e clip-on nuts 20 thread quantity per inch right-hand
- NIIN
- 015827010
- NIIN Date
- 03/03/10
- Schedule B
- 7318160000
- Name Code
- 35871
- FIIG
- A021A0
- QUP
- Historical Price
- $24.58 TF
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 94808A156 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093490 BOLT/NUT/SCREW/CLIPS/FASTENER/ETC
- UFC (universal freight code)
- 50270
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
94808A156 / Nut,clip-onWhat is the formal definition of this item?
An internally threaded fastener, plain or self-locking, of various shapes attached to a preformed item of semi-rigid material designed to retain, position or support other items by its own inherent spring action. the internally threaded fastener and the preformed item may be of one piece construction or fastened together by other means.
