Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 13080001-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A substance designed to provide a reduction of friction between the two surfaces in contact.
dry film lubricant
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.500in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
floating
0.250in.
An overall measurement of the smallest dimension of a panel,in distinction from length or width.
0.165in. and 0.195in.
The national stock number or the identification information of the end equipment for which the item is a part.
C-17A
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unjc
Those features,not otherwise specified,which may be required for proper functioning of the item.
floating nut
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A designation that is used for the purpose of general identification of the thread.
0.164in. ⁓11/64"
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.
3b internal
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
NUT-Clip, floating, 450 degree f
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
clip to float approximately 0.011 radially; surface treatment 125 microinch finish; hole dia 0.168
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1050 or steel comp 1035
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5085 assn std single material response or AMS4037 assn std single material response or aisi 4130 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type ii, class 2 fed spec single treatment response
Answers.
1EA
Steel comp 1050 or steel comp 1035
32
Right-hand
3a
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-539-1354 NUT,CLIP-ON
Used on C-17A. cadmium surface treated clip to float approximately 0.011 radially; surface treatment 125 microinch finish; hole dia 0.168 nut-clip, floating, 450 degree f 32 thread quantity per inch right-hand 3a thread class
- NIIN
- 015391354
- NIIN Date
- 04/11/06
- Schedule B
- 7318160000
- Name Code
- 35871
- FIIG
- A021A0
- QUP
- 1
- Historical Price
- $0.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | NS103739-4-62 | Cage 80539 |
| 2. | 3D0039-4 | Cage 88277 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 13080001-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
13080001-1 / Nut,clip-onWhat is the formal definition of this item?
An internally threaded fastener, plain or self-locking, of various shapes attached to a preformed item of semi-rigid material designed to retain, position or support other items by its own inherent spring action. the internally threaded fastener and the preformed item may be of one piece construction or fastened together by other means.
