Used on m19-22076 and m17-28990 1/2 in. wire rope anti-slack devices for the m17-27406 and m17-28964 4000lb tension transducers; 9f512 denison hydraulics. straight thread
Used on 1520-01-355-8250. straight connector material is kynar (pvdf) (plastic polyvinylidene fluoride) ; single barbed tube connection; working pressure 150 psi; temperature range -80 degree to 225 degree f straight, straight serrations
Used on rdd is roll on/roll off discharge facility, 1945-01-473-2282 and fc1 is the floating causeway, 1945-01-473-2162. cut to length; 3/8 inch outside diameter; 3/8 inch od x .065 inch wall; nha emer anchor sys fabrication
3/4 inch or 20 mm pipe; 7 inch or 176 mm long; allowable movement 25 deg angular; pressure reduction at higher temperatures 170 deg f 250 psi, 180 deg f 245 psi, 210 deg f 235 psi, 230 deg f 225 psi, 250 deg f 215 psi; burst pressures are a of three times operating pressures; baked enamel ductile iron pipe flanges; multi-layered kevlar tire cord fabric reinforcement with peroxide cured epdm cover, liner
1 inch or 25 mm pipe; 7 inch or 175 mm long; allowable movement 24 deg angular; pressure reduction at higher temperatures 170 deg f 250 psi, 180 deg f 245 psi, 210 deg f 235 psi, 230 deg f 225 psi, 250 deg f 215 psi; burst pressures are a of three times operating pressures; baked enamel ductile iron pipe flanges; multi-layered kevlar tire cord fabric reinforcement with peroxide cured epdm cover, liner
2 inch or 50 mm pipe; 8 inch or 200 mm long; allowable movement 21 deg angular; pressure reduction at higher temperatures 170 deg f 250 psi, 180 deg f 245 psi, 210 deg f 235 psi, 230 deg f 225 psi, 250 deg f 215 psi; burst pressures are a of three times operating pressures; baked enamel ductile iron pipe flanges; multi-layered kevlar tire cord fabric reinforcement with peroxide cured epdm cover, liner
