Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1J755-4-4C specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
plain (tube) 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
plain (tube) 2nd end
A measurement of the longest dimension of the leg,in distinction from width.
0.41in. 1st end
A measurement of the longest dimension of the leg,in distinction from width.
2.66in. 2nd end
Indicates the type of connection/s/.
threaded internal tube 1st end
Indicates the type of connection/s/.
unthreaded internal hose 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 1st end
A designation that is used for the purpose of general identification of the thread.
0.5625in. 1st end ⁓1/64"
The angle that the flow is turned from the straight flow.
45.0 degrees
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.
0.250in. 2nd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.250in. 1st end
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel stainless
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 1st end
Answers.
Un 1st end
Steel stainless
18 1st end
2b 1st end
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-631-8710 ELBOW,TUBE TO HOSE
un 1st end thread series 18 1st end thread quantity per inch 2b 1st end thread class
- NIIN
- 016318710
- NIIN Date
- 09/29/14
- Schedule B
- Name Code
- 03772
- FIIG
- A080B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 1J755-4-4C A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 052190 PIPE,TUBING,OR PIPE OR TUBING FITTI
- UFC (universal freight code)
- 30000
Similar by Design Other elbows with similar characteristics
Nothing similar to this part number was found in our inventory
1J755-4-4C / Elbow,tube to hoseWhat is the formal definition of this item?
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, the other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. it may have side or heel inlet(s). see also elbow, hose; connector, multiple, fluid pressure line; and elbow, swivel flange to hose.
