Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. GA7418W161016 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a 2nd end bulkhead
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a all ends
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
double threaded section w/ gasket and locknut sealing (boss) 2nd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flareless (tube) 3rd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flareless (tube) 1st end
A measurement of the longest dimension of the leg,in distinction from width.
1.444in. 1st end and 1.486in. 1st end
A measurement of the longest dimension of the leg,in distinction from width.
1.486in. 3rd end
A measurement of the longest dimension of the leg,in distinction from width.
2.050in. 2nd end and 2.080in. 2nd end
Indicates the type of connection/s/.
threaded external boss 2nd end
Indicates the type of connection/s/.
threaded external tube 1st end
Indicates the type of connection/s/.
threaded external tube 3rd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 2nd end bulkhead
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 3rd end
The maximum pressure at which the item is rated for operation.
1500.0 pounds per square inch single response
A designation that is used for the purpose of general identification of the thread.
1.312in. 2nd end ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
1.312in. 2nd end bulkhead ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
1.312in. 3rd end ⁓3-1/64"
A designation that is used for the purpose of general identification of the thread.
0.875in. 1st end ⁓1/64"
The angle of the end surface upon which the mated surface seats.
12.0 degrees 1st end
The angle of the end surface upon which the mated surface seats.
12.0 degrees 3rd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.562in. 1st end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
1.000in. 3rd end
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 7075 tee or aluminum alloy tee
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy lock nut
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum lock ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-367, T73 fed spec single material response
The type of media for which the item is designed.
fluid single response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, ty 2, cl 1 mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 2nd end bulkhead
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 2nd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unj 3rd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf 1st end
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.
1 locknut and 1 flat washer
Answers.
1EA
Unjf 1st end
Unj 3rd end
Un 2nd end
Un 2nd end bulkhead
Aluminum lock ring
Aluminum alloy lock nut
Aluminum alloy 7075 tee or aluminum alloy tee
12 3rd end
12 2nd end bulkhead
12 2nd end
3a all ends
3a 2nd end bulkhead
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-00-334-5781 TEE,TUBE TO BOSS
unjf 1st end thread series anodize surface treated 12 3rd end thread quantity per inch 3a all ends thread class
- NIIN
- 003345781
- NIIN Date
- 12/24/73
- Schedule B
- Name Code
- 22683
- FIIG
- A080B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $894.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | DLG231W161016 | Cage 14728 |
| 2. | 4671146W161016 | Cage 92003 |
| 3. | VSF1238W161016 | Cage 92215 |
| 4. | ER231W161016 | Cage 01276 |
| 5. | STSPB231W161016 | Cage 98897 |
| 6. | ER231W161016 | Cage 79470 |
| 7. | 2-02295W161016 | Cage 00624 |
| 8. | 4671146W161016 | Cage 50948 |
| 9. | DLG231W161016 | Cage 14798 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for GA7418W161016 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 051400 PIPE FITTINGS ALUMINUM
- UFC (universal freight code)
- 29700
Similar by Design Other tees with similar characteristics
Nothing similar to this part number was found in our inventory
GA7418W161016 / Tee,tube to bossWhat is the formal definition of this item?
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. the boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side inlet(s). it is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. see also tee, tube; and tee, pipe to tube. excludes connector, multiple, fluid pressure line.
