Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AS1035D121004 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a all ends
The national stock number or the identification information of the end equipment for which the item is a part.
RQ-4A global hawk
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flared (tube) 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flared w/ gasket seal (boss) 2nd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flared w/ gasket seal (boss) 3rd end
A measurement of the longest dimension of the leg,in distinction from width.
1.344in. 2nd end
A measurement of the longest dimension of the leg,in distinction from width.
1.542in. 1st end
A measurement of the longest dimension of the leg,in distinction from width.
0.881in. 3rd end
Indicates the type of connection/s/.
threaded external boss 2nd end
Indicates the type of connection/s/.
threaded external boss 3rd end
Indicates the type of connection/s/.
threaded external tube 1st end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 1st end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
14 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20 3rd end
A designation that is used for the purpose of general identification of the thread.
0.437in. 3rd end ⁓3-1/64"
A designation that is used for the purpose of general identification of the thread.
0.875in. 2nd end ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
1.062in. 1st end ⁓1/64"
The angle of the end surface upon which the mated surface seats.
37.0 degrees 1st end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.750in. 1st end
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2014
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS4121 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize inside
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS2470 assn std single treatment response inside
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unj 1st end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unj 2nd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf 3rd end
The document designator of the specification or standard which established the item of supply.
81343-AS1035 professional/industrial association standard
Answers.
1EA
Unjf 3rd end
Unj 2nd end
Unj 1st end
Aluminum alloy 2014
20 3rd end
14 2nd end
12 1st end
3a all ends
Schedule B number: 7609000000
Aluminum tube or pipe fittings (couplings,elbows sleeves)
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-513-8043 TEE,TUBE TO BOSS
Used on rq-4a global hawk. unjf 3rd end thread series anodize inside surface treated 20 3rd end thread quantity per inch 3a all ends thread class
- NIIN
- 015138043
- NIIN Date
- 10/07/03
- Schedule B
- 7609000000
- Name Code
- 22683
- FIIG
- A080B0
- QUP
- 1
- Historical Price
- $7,169.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Availability for AS1035D121004 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other tees with similar characteristics
Nothing similar to this part number was found in our inventory
AS1035D121004 / Tee,tube to bossWhat is the formal definition of this item?
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. the boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side inlet(s). it is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. see also tee, tube; and tee, pipe to tube. excludes connector, multiple, fluid pressure line.
