Serving our customers with quality and safety first.
2a all ends
mrap RG-33
external seat for gasket seal (boss) 2nd end
gasket seal (tube) 1st end
1.312in. 1st end
1.797in. 2nd end
threaded external boss 2nd end
threaded external tube 1st end
14 1st end
16 2nd end
600.0 pounds per square inch single response
0.750in. 2nd end ⁓2-1/64"
1.000in. 1st end ⁓1/64"
90.0 degrees
0.625in. 1st end
steel comp 12L14
chromate
un 2nd end
uns 1st end
1 locknut and 1 preformed packing
81343-J1453 professional/industrial association standard
9 figure
1EA
Uns 1st end
Un 2nd end
Steel comp 12l14
16 2nd end
14 1st end
2a all ends
Schedule B number: 8710000090
nmfc 051420
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
Used on mrap rg-33. uns 1st end thread series chromate surface treated 16 2nd end thread quantity per inch 2a all ends thread class
1. | SAE J1453-3 | Cage 81343 |
2. | FF1868T-1008S | Cage 01276 |
3. | 7-447-100803 | Cage 12361 |
4. | 1781380 | Cage 45152 |
5. | 10-8C5OLO-S | Cage 30780 |
6. | FF1868T1-1008S | Cage 01276 |
7. | SAE J1453-3 10-8 520220CA | Cage 81343 |
8. | 10-8C5OLO-S | Cage 98441 |
9. | 10-8 520220CA | Cage 81343 |
10. | J1453 | Cage 81343 |
11. | 1781380 | Cage 75Q65 |
Nothing similar to this part number was found in our inventory
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.