Serving our customers with quality and safety first.
2a 1st end
2a 2nd end
external seat for gasket seal (boss) 2nd end
flared (tube) 1st end
0.797in. 1st end
0.922in. 2nd end
threaded external boss 2nd end
threaded external tube 1st end
0.375in. 2nd end ⁓2-1/64"
0.375in. 1st end ⁓1/64"
37.0 degrees 1st end
90.0 degrees
0.188in. 1st end
steel
cadmium inside
cadmium outside
unf 1st end
unf 2nd end
1 flared sleeve and 1 locknut and 1 preformed packing and 1 short coupling nut and 1 flat washer
96906-MS51527 government standard
1EA
Unf 2nd end
Unf 1st end
Steel
2a 2nd end
2a 1st end
Schedule B number: 7307929000
nmfc 052190
Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
unf 2nd end thread series cadmium outside surface treated 2a 2nd end thread class
1. | MS51527A3 | Cage 96906 |
2. | MIL-F-18868 | Cage 81349 |
3. | 3C50XS | Cage 30780 |
4. | 3C50X | Cage 45681 |
5. | 17K2 | Cage 77237 |
6. | 3-C50X-S-C AND C | Cage 59206 |
7. | 2490248 | Cage 99551 |
8. | 3C50XS | Cage 98441 |
9. | 3C50XS | Cage 45681 |
10. | 3C5BXS | Cage 45681 |
Nothing similar to this part number was found in our inventory
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.