Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. H823-4-10-T2-LW-Z specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a all ends
The maximum temperature at which the item is rated to operate for an extended period of time.
-20.0 deg fahrenheit 1st response
The maximum temperature at which the item is rated to operate for an extended period of time.
275.0 deg fahrenheit 2nd response
The national stock number or the identification information of the end equipment for which the item is a part.
asds
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
gasket seal (tube) 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
plain (tube) 2nd end
A measurement of the longest dimension of the leg,in distinction from width.
1.9375in. 2nd end
A measurement of the longest dimension of the leg,in distinction from width.
2.000in. 1st end
Indicates the type of connection/s/.
threaded external boss 2nd end
Indicates the type of connection/s/.
threaded external tube 1st end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
14 all ends
The maximum pressure at which the item is rated for operation.
6000.0 pounds per square inch single response
A designation that is used for the purpose of general identification of the thread.
0.875in. 2nd end ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
1.000in. 1st end ⁓1/64"
The angle that the flow is turned from the straight flow.
90.0 degrees
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.250in. 2nd end
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
male elbow
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
backup washer material is stainless steel
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting lock nut
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize body
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 2nd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns 1st end
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.
1 locknut and 1 union nut and 1 tailpiece and 1 backup washer and 1 preformed packing
Answers.
1EA
Uns 1st end
Un 2nd end
Titanium body
Steel corrosion resisting lock nut
14 all ends
3a all ends
Schedule B number: 8108908000
nmfc 051420
Other wrought titanium
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-509-4735 ELBOW,TUBE TO BOSS
Used on ASDS. uns 1st end thread series anodize body surface treated backup washer material is stainless steel male elbow 14 all ends thread quantity per inch 3a all ends thread class
- NIIN
- 015094735
- NIIN Date
- 06/24/03
- Schedule B
- 8108908000
- Name Code
- 22679
- FIIG
- A080B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2,369.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for H823-4-10-T2-LW-Z A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 051420 CONDUITS,O/T EARTHEN:PIPE FITTINGS
- UFC (universal freight code)
- 29090
Similar by Design Other elbows with similar characteristics
Nothing similar to this part number was found in our inventory
H823-4-10-T2-LW-Z / Elbow,tube to bossWhat is the formal definition of this item?
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
