Serving our customers with quality and safety first.
3a 2nd end bulkhead
3a all ends
-55.0 deg fahrenheit 2nd response
275.0 deg fahrenheit 1st response
double threaded section w/ gasket and locknut sealing (boss) 2nd end
flareless (tube) 1st end
1.093in. 2nd end and 1.140in. 2nd end
0.880in. 1st end and 0.927in. 1st end
threaded external boss 2nd end bulkhead
threaded external tube 1st end
3000.0 pounds per square inch single response
0.562in. 2nd end bulkhead ⁓2-1/64"
0.562in. all ends ⁓9/16"
12.0 degrees 1st end
90.0 degrees
0.375in. 1st end
steel comp 304 or steel corrosion resisting
66, aisi 304/sae 30304 fed std single material response
aeronautical fluid 1st response
fluid 2nd response
cadmium or passivate
MIL-S-5002 mil spec 1st treatment response or QQ-P-35 fed spec 2nd treatment response
unjf 2nd end bulkhead
unjf all ends
80378-CVC4287 manufacturers standard
1EA
Unjf all ends
Unjf 2nd end bulkhead
Steel comp 304 or steel corrosion resisting
3a all ends
3a 2nd end bulkhead
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
unjf all ends thread series cadmium or passivate surface treated 3a all ends thread class
1. | CVC4287 | Cage 80378 |
Nothing similar to this part number was found in our inventory
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.