Serving our customers with quality and safety first.
3a 1st end bulkhead
3a all ends
external seat for gasket seal (boss) 2nd end
flareless (tube) 1st end
1.227in. 2nd end
1.992in. 1st end
threaded external boss 2nd end
threaded external tube 1st end
3000.0 pounds per square inch single response
0.438in. 2nd end ⁓2-1/64"
0.750in. 1st end ⁓1/64"
0.750in. 1st end bulkhead ⁓1/64"
12.0 degrees 1st end
90.0 degrees
0.500in. 1st end
steel comp 304
66 fed std single material response
fluid single response
passivate
QQ-P-35 fed spec single treatment response inside
QQ-P-35 fed spec single treatment response outside
unjf all ends
unjf 1st end bulkhead
81343-AS1008 professional/industrial association standard
1 style
1EA
Unjf 1st end bulkhead
Unjf all ends
Steel comp 304
3a all ends
3a 1st end bulkhead
Schedule B number: 7307929000
nmfc 052190
Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
unjf 1st end bulkhead thread series passivate surface treated 3a all ends thread class
1. | CVC4264J0804 | Cage 00624 |
2. | CVC4264J0804 | Cage 14728 |
3. | CVC4264J0804 | Cage 80378 |
Nothing similar to this part number was found in our inventory
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.